Drummond gold holding triples with new tenement applications
Released
Released
Announcement PDF
ASX announcement
23 February 2016
Adelaide Resources Limited
ABN: 75 061 503 375
Drummond epithermal gold project
(100% owned), Queensland
Corporate details:
ASX Code: ADN
Cash: $0.910 million
Issued Capital:
357,922,352 ordinary shares
37,222,104 listed options (ADNO)
Drummond epithermal gold holdings triple
with new tenement applications.
Summary
•
Two new tenement applications will triple the size
of the Company’s holdings over gold prospective
ground in the Drummond Basin in Queensland.
•
Nick Harding
Executive Director and
Company Secretary
The new applications secure an additional 564 square
kilometres of ground, with a total area of 838 square
kilometres now held by the Company.
•
The applications were made on vacant ground and
all Company Drummond tenements are wholly owned.
Jonathan Buckley
Non-executive Director
•
Geological mapping completed by the Queensland
Geological Survey records exposures of Drummond Basin
group rocks and, in one block, rocks of the older Anakie Inlier
basement which also hosts gold mineralisation.
•
Historical gold prospects and occurrences are located
on the new tenements, with records suggesting they
include prospects of epithermal style.
Directors:
Colin G Jackson
Non-executive Chairman
Chris Drown
Managing Director
Contact details:
69 King William Road,
Unley, South Australia 5061
PO Box 1210
Unley BC SA 5061
Tel: +61 8 8271 0600
Fax: +61 8 8271 0033
adres@adelaideresources.com.au
www.adelaideresources.com.au
Upon grant, the Company plans to complete an initial
programme of rock chip sampling, surface geochemistry
and geological mapping to define further gold targets.
Fact:
The Drummond Basin’s 0.6Moz
Yandan epithermal gold deposit
was discovered by WMC in 1987
after following up a single
anomalous stream sediment
sample that assayed 34ppb Au,
30ppm As and 5ppm Sb.
Chris Drown
Managing Director
Direct enquiries to Chris Drown. Ph (08) 8271 0600 or 0427 770 653.
Introduction
Applications for two new exploration
tenements have been lodged in the
Drummond Basin in Queensland,
tripling in size the area held by
Adelaide Resources Limited.
Drill – Discover – Develop
The two new applications, EPM 26154
and EPM 26155, cover a combined area
of 564km2, and together with existing
titles, expand the total area held to
838km2 (Figure 1).
P a g e |2
EPM 26154 “Sandalwood Creek”
EPM 26154 lies to the east of granted
licences EPM 18090 and EPM 25660.
Detailed geological mapping
completed by the Queensland
Geological Survey records areas
of outcropping Drummond Basin
lithologies (Figure 2).
The Drummond Basin units on
EPM 26154 include areas interpreted
to be Stones Creek Volcanics which
host epithermal gold prospects like
South West Limey Dam on nearby
EPM 18090.
The area also contains the
intersection of two dike swarms
that are also potential “mineralisers”.
Drill – Discover – Develop
P a g e |3
The Quartz Ridge prospect (Figure 2)
is described as a 150 metre long northeast
trending zone of low-sulphidation
epithermal quartz veining. Historical rock
chip sampling returned multiple samples
assaying over 1g/t gold, with maximum
precious metal results of 9.5g/t gold
and 201g/t silver. Seven diamond holes
were drilled by previous explorers,
with anomalous gold (to 0.16g/t)
and silver (to 25.9g/t) intersected.
Outcrops of sinter located west of
Quartz Ridge (Figure 2) have textural
and geochemical characteristics typical
of the upper parts of epithermal vein
systems. The sinters are associated
with weak to moderate gold, silver
and antimony anomalism and have
not been tested by drilling.
sulphide veining in altered metasediments.
Surface trenching delivered 70 metres
at 0.22g/t gold with individual assays
to 1.0g/t gold. Limited drilling returned a
best intersection of 1 metre at 1.3g/t gold.
East of the tenement significant results
have been reported1 from the SellheimGettysburg-Marrakesh-Madhya Pradesh
line of prospects which occur near the
contact of Anakie Inlier and Drummond
Basin rocks. Drill intersections include
35 metres at 6.1g/t gold and 8 metres
at 18.1g/t gold.
The northern block of EPM 26155 covers
Drummond Basin units intruded by PermoCarboniferous intrusives (Figure 3b).
The Souters Show prospect is described
as a small abandoned copper mine.
EPM 26155 “Mount Wyatt”
Discussion
EPM 26155 “Mount Wyatt” is located
to the south of the Company’s granted
titles and is split into a northern and
southern block (Figure 1).
Historical gold prospects on the two new
applications include likely epithermal
systems in the Drummond Basin rocks,
and possibly Sellheim-GettysburgMarrakesh-Madhya Pradesh style
mineralisation near the contact
with the Anakie Inlier.
The geology of the southern block is
dominated by Drummond Basin units
in the north and older Anakie Inlier units
in the south (Figure 3a).
Recorded prospects in the Drummond
sequences include Mount Stone, a three
kilometre long, 100 metre wide
hydrothermal breccia pipe-vein system;
and the Buried Hatchet prospect,
where rock chip samples recorded
up to 62g/t gold. Limited drilling at both
prospects failed to intersect significant
gold intervals, however they confirm
potential mineralising processes
have occurred.
The Anakie Inlier also hosts gold
mineralisation. At the Carey Guille
prospect highly anomalous stream
sediment samples were found in creeks
draining an area of gossanous quartz-
Drill – Discover – Develop
The 1.1Moz Wirralie and 0.6Moz Yandan
deposits (Figure 1) are also located
in Drummond Basin rocks near the contact
of the Anakie Inlier, and the ~10km long
contact zone in EPM 26155 represents
an interesting area.
The Company is planning further surface
based exploration including rock chip
sampling and soil geochemistry on its
granted Drummond Basin tenements
in the first half of 2016. This approach
has been successfully employed to cost
effectively define drill targets at the South
West Limey Dam and Bunyip prospects,
and similar programmes are planned
on the two new EPMs once granted.
P a g e |4
Drill – Discover – Develop
P a g e |5
Competent Person Statement and JORC 2012 notes
The information in this report that relates to Exploration Targets, Exploration Results, Mineral
Resources or Ore Reserves is based on information compiled by Chris Drown, a Competent Person,
who is a Member of The Australasian Institute of Mining and Metallurgy. Mr Drown is employed by
Drown Geological Services Pty Ltd and consults to the Company on a full time basis. Mr Drown has
sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the
2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves’. Mr Drown consents to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
1: See MGT Resources ASX release dated 28 July 2015 titled “Amendment to MGT Intersects high
grade gold at Pyramid project.”
Drill – Discover – Develop
P a g e |6
1
JORC CODE, 2012 EDITION – TABLE 1
1.1 Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
Drilling
Techniques
Drill Sample
Recovery
Logging
Subsampling
techniques
and sample
preparation
JORC Code explanation
• Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
hand held XRF instruments, etc) These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of
detailed information.
• Drill type (air core, reverse circulation, open-hole
hammer, rotary air blast , auger, Bangka, sonic, etc)
and details (eg core diameter, triple or standard tube,
depth of diamond tails, face sampling bit or other
type, whether core is orientated and if so, by what
method, etc).
• Method of recording and assessing core and chip
sample recoveries and results assessed.
• Measures taken to maximise sample recovery and
ensure representative nature of the sample.
• Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
coarse/fine material.
• Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
• The total length and percentage of the relevant
intersections logged.
• If core, whether cut or sawn and whether quarter, half
or all core taken.
• If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
Drill – Discover – Develop
Commentary
• No sampling results completed
by the Company are included
in the report.
• No drilling results completed
by the Company are included
in the report.
• No drilling results completed
by the Company are included
in the report.
• No drilling results completed
by the Company are included
in the report.
• No surface or drilling results
completed by the Company are
included in the report.
P a g e |7
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
Data
spacing and
distribution
Orientation
of data in
relation to
geological
structure
Sample
security
Audits
reviews
or
technique.
• Quality control procedures adopted for all subsampling stages to maximise representativity of
samples.
• Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain
size of the material being sampled.
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld
XRF instruments, etc, the parameters used in
determining the analysis including instrument make
and mode, reading times, calibration factors
applied and their derivation, etc.
• Nature and quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(ie lack of bias) and precision have been
established.
• The verification of significant intersections by either
independent or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical or electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches,
mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Data spacing for reporting of Exploration Results
• Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s)
and classification applied.
• Whether sample compositing has been applied.
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
• The measures taken to ensure sample security.
• The results of any audits or reviews of sampling
techniques and data
Drill – Discover – Develop
• No surface or drilling results
completed by the Company are
included in the report.
• No surface or drilling results
completed by the Company are
included in the report.
• No surface or drilling
results completed by the
Company are included in
the report.
• No surface or drilling results
completed by the Company are
included in the report.
• No surface or drilling results
completed by the Company are
included in the report..
• No surface or drilling results
completed by the Company are
included in the report.
• No audits or reviews of past
sampling techniques have been
completed.
P a g e |8
1.2 Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section may apply to this section)
Criteria
Mineral
tenement
and land
tenure
status
JORC Code explanation
• Type, reference name/number, location and ownership
including agreements of material issues with third
parties such as joint ventures, overriding royalties,
native titles interests, historical sites, wilderness or
national park and environmental settings.
• The security of the tenure held at the time of reporting
along with any known impediments to obtaining a
license to operate in the area.
Exploration
done by
other
parties
• Acknowledgement and appraisal of exploration by
other parties.
Geology
• Deposit type, geological setting and style of
mineralisation.
Drill hole
Information
• A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all Material
drill holes:
o Easting and northing of the drill collar
o Elevation or RL (Reduced Level – elevation above
sea level in meters) of the drill collar.
o Dip and azimuth of the hole.
o Down hole length and interception depth.
o Hole length.
• If the exclusion of this information is justified on the
axis that the information is not Material and this
exclusion does not detract from the understanding of
the report, the Competent Person should clearly
explain why this is the case.
• In reporting Exploration Results, weighting averaging
techniques, maximum and/ or minimum grade
truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths
Data
aggregation
methods
Drill – Discover – Develop
Commentary
• The area the subject of this
report falls within EPM
applications numbered 26154
and 26155, which are 100%
owned by Adelaide
Exploration Pty Ltd, a wholly
owned subsidiary of Adelaide
Resources Limited.
• There are no third party
agreements, non govt
royalties, or historical sites
known. Underlying land title
is Pastoral leasehold. The
tenement applications are
covered by a Native Title
claim and resolution of NT
issues will be required prior to
grant.
• The general area the subject
of this report has been
explored in the past by ACM
Minerals, Normandy Mining,
Ramelius Resources, MGT
Mining and others. The
Company is in the process of
reviewing past exploration
data generated by previous
explorers.
• Deposits in the general region
are considered to be of low
sulphidation epithermal vein
style (Drummond Basin) or
shear zone related (Anakie
Inlier).
• The report does not include
drilling results.
• The report does not include
drilling results.
P a g e |9
•
Relationship
between
mineralisati
on widths
and
intercept
lengths
Diagrams
Balanced
Reporting
Other
substantive
exploration
data
Further
work
•
•
•
of high grade results and longer lengths of low grade
results, the procedure used for such aggregation should
be stated and some typical examples of such
aggregations should be shown in some detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
These relationships are particularly important in the
reporting of Exploration Results.
If the geometry of the mineralisation with respect to the
drill hole angle is known, its nature should be reported.
If it is not known and only the down hole lengths are
reported, there should be a clear statement to this effect
(eg ‘down hole length, true width not known’).
• Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported. These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
• Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting of
both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration
Results.
• Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density, ground water, geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
• The nature and scale of planned further work (eg tests
of lateral extensions or depth extensions or large scale
step-out drilling).
• Diagrams clearly highlighting the areas of possible
extensions, including the main geological
interpretations and future drilling areas, provided this
information is not commercially sensitive.
Drill – Discover – Develop
• The report does not include
drilling results.
• Appropriate maps are
included as Figures 1, 2 3a
and 3b in the report.
• The report does not include
new exploration results.
• Review of previous
exploration has not reached a
point where an assessment on
this can be made.
• The report advises that the
company is planning to
complete surface exploration
once the titles are granted.
P a g e | 10
Share your feedback
Discover